57 ? nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com ceramic disc capacitors ncd series class i temperature compensating and temperature stable types (class i) features ? provides an accurate, predictable linear capacitance .. change with variations in operating temperature ? npo types provide drift free performance ? tight tolerances available ? available with formed leads and on tape specifications +10 f d +5 c b a o -5 -10 a b c d f e -55 -35 -15 +5 +25 +45 +65 +85 a ? npo b ? n-150 c ? n-330 d ? n-750 e ? n-1500 f ? sl tem per a ture percent change from 25 o c temperature characteristics npo n150 n750 sl n1500 n3300 operating temperature range -30c ~ +85c capacitance range 0.5 ~ 470pf 3.0 ~ 27pf 22 ~ 470pf 0.5 ~ 1000pf 22 ~ 2200pf 47 ~ 1000pf standard tolerance 5% (j) capacitance change over temperature range 1% -1 ~ +2% -5% ~ +7.5% -5% ~ +9% -10% ~ +20% -13% ~ +12% q factor (min. 1mhz) 1000 (c> 30pf) 400+20c (<30pf) 500 (c> 30pf) 200+10c (<30pf) insulation resistance minimum 10,000 megohms temperature coef? cient 060ppm n15060ppm n750120ppm n330500ppm n1500250ppm n3300500ppm working voltage range 50vdc ~ 1kvdc dielectric withstanding voltage (test voltage) 2.5 times rated voltage for not less than 1 second, 50ma maximum load life test @ 85c 1,000 hours cap. change 3% 5% 8% 15% 30% 50% 50% q factor (min.) shall confom to initial measurements above i.r. (min.) 10,000 megohms test conditions <1,000pf; 1mhz, 1.2vrms max., > 1,000pf; 1khz, 1.2vrms max. ncd 101 j 500 npo tr j optional packaging tr = taped and reel tb = tape and box (ammo) optional lead style c = cut lead d = inside kink (short leads) e = outward kink (short leads) j = inside kink (long leads) k = outward kink (long leads) temperature coef? cient working voltage dc tolerance code c = 0.25pf k = 10% d = 0.5pf m = 20% j = 5% z = + 80% / - 20% capacitance code, expressed in pfd, first two digits are signi? cant, third digit is no. of zeros. ?r? indicates decimal for under 10pfd. series rohs compliant f .1ls optional lead space (ls) and/or lead length (ll) in inches *see part number system for details
58 ? nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com ceramic disc capacitors standard products and maximum diameter (mm) by t.c. and voltage ncd series class i nic reserves the right to request minimum quantities on certain values lead diameter 0.6mm is standard body thickness 2 ~ 4mm dependent on cv (bulk only) (bulk and taped styles) 23 min. 5 max. s j style 1.5+ 0.2 4.7 + 1 5 max. s d style 1.5+ 0.2 k style 23 min. 5 max. 1.5+ 0.2 s e style 4.7 + 1 5 max. 1.5+ 0.2 s 23 min. 2 max. s low voltage 100vdc & below standard 500vdc & up 23 min. 3 max. s lead spacing (mm) - s body diameter standard bulk standard t&r optional bulk mm (inches) optional t&r mm (inches) 5 ~ 11 6.35 0.8 5.0 0.8 5.0 0.8 (0.2ls) 2.5 0.8 (0.1ls) > 12 6.35 0.8 5.0 0.8 7.5 0.8 (0.295ls) 7.5 0.8 (0.295ls) 10.0 0.8 (0.395ls) 10.0 0.8 (0.395ls) cap. (pf) npo n150 n750 sl n1500 n3300 working voltage (vdc) 50 100 500 1k 50 100 500 1k 50 100 500 1k 50 100 500 1k 50 100 500 1k 50 100 500 1k 0.5 ~ 18 666667 - - - 666 ------ 20 666678666666 ------ 22 666678666666666 - - - 27 666789666666666 - - - 33 667 --- 667666666 - - - 39 677 --- 667666666 - - - 47 678 ---678 666666 - 6 - 56 778 --- 778666666 - 66 68 779 --- 779666666 - 66 75 779 --- 779667667 - 66 82 779 --- 779667667666 100 8 8 10 --- 8810667677666 120 8 8 10 --- 8810667677666 150 9 9 12 --- 9912678688667 180 9 9 14 --- 9914678688677 220 10 10 16 --- 101016789799777 270 12 12 16 - - - 12 12 16 8 9 10 8 9 10 7 7 7 330 14 14 18 - - - 14 14 18 8 10 12 8 10 12 7 7 8 470 16 16 20 - - - 16 16 20 9 12 14 9 12 14 7 8 9 560---------1012141014148911 680---------10141610141681011 750---------12161612161681011 820---------12161612161681011 1000 ---------141618141618101213
65 ? nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com ceramic disc capacitors taping speci? cations dimensions (mm) diameters up to 22mm max. are available on tape. t = 2 ~ 7mm dependent on t.c. and cv ammo pack * -dimension ?p? is 12.7mm, for diameters up to 12mm, and 25.4mm for diameters 13-22mm. h 372 (14.64") l 377 (14.84") w 55 (2.16") acceptable to standard radial type cartridge. acceptable to standard radial type cartridge with a few extra accessories. d < 354 (13.93") b > 21 (.83") but < 30 (1.18") w < 55 (2.16") = = = = t d d h 0 h 1 l w p 0 p p 2 p 1 s d h h l w reel w d b h t d d h h 1 l w p 0 p p 2 p 1 s d symbol d max. d p* p 0 p 1 p 2 shh 0 h 1 d wl t h value 12.0 22.0 0.6 12.7 25.4 12.7 5.1 3.85 3.18 2.6 6.35 2.5 5.0 6.35 7.5 20.0 16.0 max. 32.25 4.0 18.0 max. 11.00 0.7 0 tolerance --- +0.06 -0.05 1.0 0.2 0.7 1.0 0.8 -0.2 +1.5 -1.0 0.5 --- 0.2 0.5 --- 0.2 2.0
|
